Aircraft crashed in the air with P3D V4.5

[Tony kim]

After updating P3D V4.5

PMDG737NGX, Flythemaddog X MD82 crashed at a specific loction on a NZQN - NZWN route

it's happened about 10 times ..means that every single flight crashed

The position is 43.5nm away from the DOPKI [TIMJO → DOPKI]

Please help me


[Waypoints]
NZQN NZZC S4501.3 E16844.4 ANPOV3A 052 3 379
QN843 S4500.4 E16849.0 ANPOV3A 009 2 376
QN846 S4458.6 E16850.8 ANPOV3A 286 2 374
QN849 S4457.1 E16848.3 ANPOV3A 246 1 372
QN852 S4457.1 E16846.6 ANPOV3A 193 3 371
LEMAK S4459.7 E16843.8 ANPOV3A 066 4 368
QN861 S4459.7 E16849.8 ANPOV3A 352 9 364
METUX S4450.6 E16853.6 ANPOV3A 000 10 355
ANPOV S4441.6 E16859.2 ANPOV3A 042 22 345
ATVOR S4432.7 E16927.3 ANPOV3A 042 12 323
TIMJO S4427.7 E16942.9 Y153 038 95 311
DOPKI S4341.8 E17138.0 Y153 050 40 216
CH 115.30 S4330.2 E17230.9 Y393 014 40 176
GRETA S4258.2 E17303.6 Y393 013 20 136
LUXEV S4242.0 E17319.7 Y393 014 64 116
WARDS S4150.5 E17410.1 013 8 52
OMDOX S4144.0 E17416.3 WARDS1D 004 27 44
PHNIX S4120.0 E17432.6 WARDS1D 004 7 17
DORBU S4114.0 E17436.7 WARDS1D 101 10 10
NZWN S4119.6 E17448.3

System: 6700k 4.5oc water cooled , 16gram, GTX1070
ADD on : OBRX Global,Vector,Region of NZSI,NZNI ,NZQN airport
FSdreamteam GSX, sceneris, Aerosoft scenery,
Ultimate traffic live
removed addon for test: FSUIPC,Activesky P3DV4, Chaseplane Oldprop
latest NVIDIA driver installed for GTX 1070

[Martyson]

After updating P3D V4.5

PMDG737NGX, Flythemaddog X MD82 crashed at a specific loction on a NZQN - NZWN route

it's happened about 10 times ..means that every single flight crashed

The position is 43.5nm away from the DOPKI [TIMJO → DOPKI]

Please help me


[Waypoints]
NZQN NZZC S4501.3 E16844.4 ANPOV3A 052 3 379
QN843 S4500.4 E16849.0 ANPOV3A 009 2 376
QN846 S4458.6 E16850.8 ANPOV3A 286 2 374
QN849 S4457.1 E16848.3 ANPOV3A 246 1 372
QN852 S4457.1 E16846.6 ANPOV3A 193 3 371
LEMAK S4459.7 E16843.8 ANPOV3A 066 4 368
QN861 S4459.7 E16849.8 ANPOV3A 352 9 364
METUX S4450.6 E16853.6 ANPOV3A 000 10 355
ANPOV S4441.6 E16859.2 ANPOV3A 042 22 345
ATVOR S4432.7 E16927.3 ANPOV3A 042 12 323
TIMJO S4427.7 E16942.9 Y153 038 95 311
DOPKI S4341.8 E17138.0 Y153 050 40 216
CH 115.30 S4330.2 E17230.9 Y393 014 40 176
GRETA S4258.2 E17303.6 Y393 013 20 136
LUXEV S4242.0 E17319.7 Y393 014 64 116
WARDS S4150.5 E17410.1 013 8 52
OMDOX S4144.0 E17416.3 WARDS1D 004 27 44
PHNIX S4120.0 E17432.6 WARDS1D 004 7 17
DORBU S4114.0 E17436.7 WARDS1D 101 10 10
NZWN S4119.6 E17448.3

System: 6700k 4.5oc water cooled , 16gram, GTX1070
ADD on : OBRX Global,Vector,Region of NZSI,NZNI ,NZQN airport
FSdreamteam GSX, sceneris, Aerosoft scenery,
Ultimate traffic live
removed addon for test: FSUIPC,Activesky P3DV4, Chaseplane Oldprop
latest NVIDIA driver installed for GTX 1070

Have you tried the Rwy 05 NZQN ANPOV3A SID transition TIMJO NZWN RWY 16 WARDS1D STAR into NZWN
in a default P3D aircraft?

[Tony kim]

I think cannot insert route for default aircraft but i will try with gps flight

[Martyson]

I think cannot insert route for default aircraft but i will try with gps flight

Correct.
The route example you used was one using real world procedures /waypoints which P3D does not use.

So, a test flight for P3D, using P3D waypoints would be like this:
NZQN, ATVOR, TIMJO, CH, GRETA, NZWN

[Tony kim]

I found the cause of crash

That's not the P3D V4.5

ORBX NZSI region scenery makes invisible wall in the air

P3D V4.5 has no problem

thanks

[Martyson]

I found the cause of crash

That's not the P3D V4.5

ORBX NZSI region scenery makes invisible wall in the air

P3D V4.5 has no problem

thanks

I do not know why an invisible wall would be present in the scenery.
I have Option / Crash Detect / turned off in my setup.

Thank you for providing the resolution information.