Force feedback yoke with GA control wheel

supersym · Post by **supersym** » Fri May 15, 2015 11:42 am

Hello !
Is anybody here who use this yoke of Flight illusion ?
http://www.flightillusion.com/index.php ... gory_id=12
I want to know if the force feed back is allright with p3d 2.5.
THanks for yours answer

Navajo31 · Post by **Navajo31** » Sun May 17, 2015 7:04 am

Hi,

I have visited the company a few weeks ago.
The yoke should work with P3D.
They are built to order.
Also they told me that they would like to refine the design a bit.
Maybe if you show some interest, it will happpen sooner.

Quite a nice product btw.

supersym · Post by **supersym** » Tue May 19, 2015 3:48 am

Thank you for your answer

Ernest7 · Post by **Ernest7** » Fri May 22, 2015 11:02 am

Hello!!!

I have 3 force feed back YOKE from Flight Illusion! the hardware work perfect with P3D V 1.X..2.XXX!!!
The ultimate software 10.0.8 (http://www.flightillusion.com/index.php ... Itemid=484)
Is fine control (forces, alerions, etc) of feedback control!
Is wonderful YOKE, Recomended!
Ps..The autopilot yoke work fine whit path the heading! see you!
Happy Flight´s!

supersym · Post by **supersym** » Sat May 23, 2015 2:26 am

Thanks Ernesto. What do you think about the simulating of wind's turbulences (gust...)

supersym · Post by **supersym** » Tue May 26, 2015 9:42 am

Ernesto ? =)

Navajo31 · Post by **Navajo31** » Tue Jun 02, 2015 3:00 am

Hi Supersym.

If you refer to how the yoke simulates turbulence, that is one interesting discussion i had with the designers.
In most planes i fly/have flown, the yoke does not move during turbulence. Only some very light plane/gliders where the controls move during turbulence. In large planes especialy the yoke is linked to hydraulics. You only see the yoke move when the autopilot responds to "upsets" or deviations in the fligpath.

Flight illusion have included something in their software to have the yoke move during turbulence, due to customer demand. I peronaly don't like it for above reasons, but you can tune it in the software, or switch it on/off.

Cheers

supersym · Post by **supersym** » Fri Jul 31, 2015 9:27 am

Hello !
Do you have issue using that FI Yoke with the A2A cherokee ?