NEW NVDIA DRIVER WORKS GREAT IN P3D

For all topics that don't fit into another category. Note that we cannot promise that any of these posts will be responded to by our development team.
shermank
Posts: 78
Joined: Thu Nov 28, 2013 6:17 pm

NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby shermank » Tue Aug 18, 2020 12:14 pm

Nvidia made it a point to announce that its latest driver will be fine for the new MSFS 2020. But, for those of us sticking with P3D, I am here to tell you it makes a vast improvement for our platform, too. At least that is my experience, and as people who follow this forum and may recognize my name may recall, I have had my driver issues!

But, not anymore. Here is the link to the driver. I suggest you install and give it a whirl. For me, the visual impression and performance were immediately evident.

Sherm

https://www.nvidia.com/Download/driverR ... 2983/en-us

Here is a screen shot giving you a rough idea of what to expect

Image

MPO910
Posts: 174
Joined: Wed Apr 15, 2020 5:00 am

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby MPO910 » Tue Aug 18, 2020 5:13 pm

Yes. It seems to make P3D V5 more smooth, even with VR a also thought I have better smoothnes.

User avatar
Martyson
Posts: 9982
Joined: Sun Mar 25, 2012 11:08 am

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby Martyson » Wed Aug 19, 2020 8:36 am

@ shermank ,

What was your last Nvidia driver?
What problem did you have with it?
Which P3Dxxx version are you using?
Do you have a comparing screenshot for that Nvidia driver?
Best Regards,
Vaughan Martell (KDTW)

Aussie1234
Posts: 83
Joined: Mon Jun 12, 2017 3:12 am

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby Aussie1234 » Wed Aug 19, 2020 9:36 pm

I'd be interested to hear how it improves P3d?
I did install the latest driver at the same time I installed MSFS (tested that for 2 days and have come back to P3d)

I don't notice any difference? I am running P3d v4.5HF3, over a View Group, consisting of four non G sync monitors? What difference should I see? The frame rate is the same as before?

Aussie
Image

Alox
Posts: 198
Joined: Thu Apr 16, 2020 5:49 pm
Location: Mexico

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby Alox » Fri Aug 21, 2020 1:10 am

Maybe it was a placebo effect. I did not see any difference at all either.

Regards.

Michael747
Posts: 7
Joined: Mon Jun 15, 2020 10:28 pm

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby Michael747 » Sun Aug 23, 2020 1:23 am

I didn't notice any improvement as fare as frame rates or the few stutters i get on the ground when taxiing, but i did mark a slight improvement in textures and details changing, as got closer to them, or trees popping up at low altitudes.

shermank
Posts: 78
Joined: Thu Nov 28, 2013 6:17 pm

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby shermank » Tue Sep 01, 2020 11:22 am

@ shermank ,

What was your last Nvidia driver?
What problem did you have with it?
Which P3Dxxx version are you using?
Do you have a comparing screenshot for that Nvidia driver?
My pevious drive was the Nvidia 760.
Most of the problems involved the dxgl error
I fly P3D 4.5 with the latest HF

Here is a screenshot with the 760 which was fine, except when it wasn't...:-)
Sherm

Image

User avatar
Martyson
Posts: 9982
Joined: Sun Mar 25, 2012 11:08 am

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby Martyson » Tue Sep 01, 2020 11:33 am

@ shermank ,

What was your last Nvidia driver?
What problem did you have with it?
Which P3Dxxx version are you using?
Do you have a comparing screenshot for that Nvidia driver?
My pevious drive was the Nvidia 760.
Most of the problems involved the dxgl error
I fly P3D 4.5 with the latest HF

Here is a screenshot with the 760 which was fine, except when it wasn't...:-)
Sherm

Image
@ shermank ,

"My pevious drive was the Nvidia 760."
What does that mean?

What is your screenshot showing?
Best Regards,
Vaughan Martell (KDTW)

wrap23
Posts: 4
Joined: Sun Feb 21, 2016 4:42 am

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby wrap23 » Mon Sep 07, 2020 3:05 pm

I found it quite interesting that Nvidia released a new driver immediately after MSFS2020’s release. Nvidia even pointed out the driver’s support for the flight simulator. I’ve never seen that before!
When LM released P3Dv5 I was surprised to see an Nvidia Logo on the P3D startup screen. I thought perhaps Nvidia was working with LM and was FINALLY going to start including optimization for flight simulation in their drivers.
Well I guess it took a heavy hitter like MS to get Nvidia on board. LM wasn’t enough!
Hopefully MS’s reentry into flight simulation will be beneficial to Nvidia’s future driver designs.
Surprising though that MS, the creator of DirectX, chose to use DX11 for their “visually stunning” sim versus DX12 like LM has done!

User avatar
Martyson
Posts: 9982
Joined: Sun Mar 25, 2012 11:08 am

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby Martyson » Mon Sep 07, 2020 3:52 pm

I found it quite interesting that Nvidia released a new driver immediately after MSFS2020’s release. Nvidia even pointed out the driver’s support for the flight simulator. I’ve never seen that before!
When LM released P3Dv5 I was surprised to see an Nvidia Logo on the P3D startup screen. I thought perhaps Nvidia was working with LM and was FINALLY going to start including optimization for flight simulation in their drivers.
Well I guess it took a heavy hitter like MS to get Nvidia on board. LM wasn’t enough!
Hopefully MS’s reentry into flight simulation will be beneficial to Nvidia’s future driver designs.
Surprising though that MS, the creator of DirectX, chose to use DX11 for their “visually stunning” sim versus DX12 like LM has done!
@ wrap23 ,

Have you purchase P3Dv5?
Best Regards,
Vaughan Martell (KDTW)

wrap23
Posts: 4
Joined: Sun Feb 21, 2016 4:42 am

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby wrap23 » Mon Sep 07, 2020 4:06 pm

Yes I have v5. I anxiously awaited it and bought it right away. I’m using an i9900k and 1080ti. I’m very pleased with the improvements v5 brought in the graphics area compared to v4. I didn’t notice any additional difference when I updated to the latest Nvidia driver. My biggest issue with P3D is autoGen popping and watching terrain being “drawn” in front of me. I really hope this can be fixed in the future. I have a HUGE investment in this platform!

JorgenSA
Posts: 2691
Joined: Sun Mar 11, 2018 7:17 am
Location: 5 NM NE of EDXF

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby JorgenSA » Tue Sep 08, 2020 7:04 am

Wrap23,

Under [TERRAIN] in your Prepar3d.cfg file, what is your LOD_RADIUS set to?

The default is 4.5, setting it to for instance 6.5 should do something about the drawing of terrain in front of you, but that will also increase your VRAM usage.

Jorgen
System: i7-7700K @ 4.66 GHz, ASUS Z170-A motherboard, 16 GB 3200 MHz DDR4 RAM, nVidia GTX 960 w/ 4 GB DDR5 VRAM, Windows 10 Home.

All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.

wrap23
Posts: 4
Joined: Sun Feb 21, 2016 4:42 am

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby wrap23 » Tue Sep 08, 2020 8:06 pm

Wrap23,

Under [TERRAIN] in your Prepar3d.cfg file, what is your LOD_RADIUS set to?

The default is 4.5, setting it to for instance 6.5 should do something about the drawing of terrain in front of you, but that will also increase your VRAM usage.

Jorgen
Thanks Jorgen. I’ll give this a try!

737SimGuy
Posts: 50
Joined: Tue Apr 01, 2014 9:40 pm
Location: Northern California

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby 737SimGuy » Fri Oct 30, 2020 10:46 pm

Wrap23,

Under [TERRAIN] in your Prepar3d.cfg file, what is your LOD_RADIUS set to?

The default is 4.5, setting it to for instance 6.5 should do something about the drawing of terrain in front of you, but that will also increase your VRAM usage.

Jorgen
Thanks Jorgen. I’ll give this a try!

Hi, did this make any difference??

wrap23
Posts: 4
Joined: Sun Feb 21, 2016 4:42 am

Re: NEW NVDIA DRIVER WORKS GREAT IN P3D

Postby wrap23 » Sat Oct 31, 2020 10:24 am

Hello Jorgen,
Sorry you had to ask. I should have responded. My apologies. Yes there is an improvement and my 1080ti handles the increase just fine.
Thank you very much for the suggestion and your interest in the outcome!
Happy Flying,
Don


Return to “Miscellaneous”

Who is online

Users browsing this forum: No registered users and 16 guests