P3D V4.5 reboots

Any issues, problems or troubleshooting topics related to installing the Prepar3D client application or it's installer.
David2406
Posts: 13
Joined: Tue Aug 11, 2020 1:15 pm

Re: P3D V4.5 reboots

Postby David2406 » Mon Aug 17, 2020 1:27 pm

OK, going to install and test...thx and see you

David2406
Posts: 13
Joined: Tue Aug 11, 2020 1:15 pm

Re: P3D V4.5 reboots

Postby David2406 » Mon Aug 17, 2020 2:17 pm

It seems there's no problem in P3D...

User avatar
Martyson
Posts: 10072
Joined: Sun Mar 25, 2012 11:08 am

Re: P3D V4.5 reboots

Postby Martyson » Mon Aug 17, 2020 2:48 pm

It seems there's no problem in P3D...
@ David2406 ,

That is good.
Best Regards,
Vaughan Martell (KDTW)

David2406
Posts: 13
Joined: Tue Aug 11, 2020 1:15 pm

Re: P3D V4.5 reboots

Postby David2406 » Mon Aug 17, 2020 2:51 pm

Yes but I'm scared now to install addons... :-D

User avatar
Martyson
Posts: 10072
Joined: Sun Mar 25, 2012 11:08 am

Re: P3D V4.5 reboots

Postby Martyson » Mon Aug 17, 2020 2:56 pm

Yes but I'm scared now to install addons... :-D
@ David2406,

Check with your Add-on developers and verify if ready for your P3D version.

Install only one and test.

Stop at the first problem and notify that developer.

Note:

Reboot PC after each test / flight and wait for Windows to completely close (takes a minute) before starting P3D again.

Good luck.
Best Regards,
Vaughan Martell (KDTW)

David2406
Posts: 13
Joined: Tue Aug 11, 2020 1:15 pm

Re: P3D V4.5 reboots

Postby David2406 » Mon Aug 17, 2020 6:06 pm

Well...3 flights made (LKPR-LKTB, LKTB-LKPR, LKPR-LKMT). First PMDG 777, other two A320, third made from Aerosoft LKPR. Without problem.

Tomorrow I'll go on with PMDG 747 and will try Active Sky.

Is possible, that everything was caused only by installing into Program Files?

David2406
Posts: 13
Joined: Tue Aug 11, 2020 1:15 pm

Re: P3D V4.5 reboots

Postby David2406 » Wed Aug 19, 2020 6:45 pm

No no no...I really don't know what's the problem

Tried already everything...

KevinKaessmann
Posts: 63
Joined: Sat Aug 04, 2018 10:14 am

Re: P3D V4.5 reboots

Postby KevinKaessmann » Sun Aug 30, 2020 3:10 pm

In many cases, unexpected reboots come from hardware problems.

So if the problem persists, why waste time by stress testing the hardware with P3D ?
Better do stress tests by tools (leaving your pc alone), e.g.
https://www.tomshardware.com/reviews/st ... ,5461.html.

But be careful with prime95 AVX as it easily fries the processor (monitor the temperature !).


Return to “Prepar3D Installation and Installer Questions”

Who is online

Users browsing this forum: No registered users and 40 guests