Hot CPU temps

[Martyson]

@ MatthijsRoothans ,

Mine is in the Advanced CPU Core section.

Just to verify:
Have you made changes to your BIOS settings since the IT specialist build your pc ?

Made any changed to the System Registry "tweeks"?

Changes "tweeks" to any P3D default files?

[MatthijsRoothans]

Alr, ill check later on! if i find it, to what setting do i need to set/change it to? Thanks for the help!

[Martyson]

Alr, ill check later on! if i find it, to what setting do i need to set/change it to? Thanks for the help!

@ MatthijsRoothans ,

You are welcome.

Also see my last post it was posted during your reply.

[MatthijsRoothans]

Have you made changes to your BIOS settings since the IT specialist build your pc ?
yes i did:
-I turned boost peformance mode to Turbo peformance
-I disabled Intel(R) Speedstep(tm)
-I disabled Intel(R) Speed Shift Technology
-I enabled turbo mode

Made any changed to the System Registry "tweeks"?
No

Changes "tweeks" to any P3D default files?
I changed in the p3d config file UIHardwareAcceleration to false (for the reshade)

Does your Motherboard BIOS have a Power Limit TDP setting / Options?
I haven't seen/found this option in the BIOS

[Martyson]

Have you made changes to your BIOS settings since the IT specialist build your pc ?
yes i did:
-I turned boost peformance mode to Turbo peformance
-I disabled Intel(R) Speedstep(tm)
-I disabled Intel(R) Speed Shift Technology
-I enabled turbo mode

Made any changed to the System Registry "tweeks"?
No

Changes "tweeks" to any P3D default files?
I changed in the p3d config file UIHardwareAcceleration to false (for the reshade)

Does your Motherboard BIOS have a Power Limit TDP setting / Options?
I haven't seen/found this option in the BIOS

@ MatthijsRoothans ,

Ok,
You know your current settings / changes.

What do you think about selecting return BIOS to Factory Defaults and doing a test?

[MatthijsRoothans]

Okay so i just returned BIOS to Factory Default, still the same issue. Nothing changed, still hitting 95 degrees :/ It only happens when im airborne, from the moment i pass 4000 feet i start getting temp issues. On the ground everything works perfectly.

[Martyson]

Okay so i just returned BIOS to Factory Default, still the same issue. Nothing changed, still hitting 95 degrees :/ It only happens when im airborne, from the moment i pass 4000 feet i start getting temp issues. On the ground everything works perfectly.

@ MatthijsRoothans ,

Are you flying the default P3D aircraft?

Using a weather program ?

Anything else?

[Martyson]

Quick test
P3Dv5.2.22.27615
Active Sky real Wx
KDTW
screenshot example typical CPU temps

[MatthijsRoothans]

Okay did some more testing, till now the only solution i found is to turn off the tubobooster. Temps are than fine but the peformance is horrible, i had 15 fps while using a system that costs around 1800 euro....

Are you flying the default P3D aircraft?
Yep, using the default planes, i also use the pmdg and fslabs to test. All planes have the same issue.

Using a weather program?
Yep! Im using active sky for p3d

Anything else?
Yep! Im also using: Chaseplane, Volanta and Flychrono

[Martyson]

Okay did some more testing, till now the only solution i found is to turn off the tubobooster. Temps are than fine but the peformance is horrible, i had 15 fps while using a system that costs around 1800 euro....

Are you flying the default P3D aircraft?
Yep, using the default planes, i also use the pmdg and fslabs to test. All planes have the same issue.

Using a weather program?
Yep! Im using active sky for p3d

Anything else?
Yep! Im also using: Chaseplane, Volanta and Flychrono

Just for additional information:
I also use
the pmdg and fslabs
active sky for p3d
Chaseplane

I have no idea what these are:
Volanta and Flychrono

If you want me to test a specific setup with my products I will.

Here is my setup:
Desktop PC Specs:
No Overclocking
Windows 11 Home
21H2
build 22000.318
Windows Feature Experience Pack 1000.22000.318.0

Thermaltake Versa J22 RGB case
i9 9900K
Corsair H100i Pro RGB cooler
Gygabyte Z390
Gigabit Ethernet , WiFi
1000W PS
1TB NVMe SSD (WIN11)
1TB NVMe SSD (Data)
32GB DDR4 memory
Realtek Audio
Stereo speakers (wired)
SoundBlaster Fury headset (USB and wired options)
GeForce RTX 2080 Ti 11GB (DP/HDMI)
Viewsonic 24 inch display VA2446MH-LED (1 HDMI input)
Viewsonic 22 inch display VX2250WM-LED (1 DVI input)
SAITEK Proflight Yoke and Throttles (3 Axis) module
SAITEK Proflight Throttles (3 Axis) second module
Thrustmaster Hotas Warthog Joystick and Throttles
Thrustmaster TCA Throttle Quadrant and Sidestick
24x DVD RW (internal)
Card reader
Belkin 7 port USB 2.0 Powered Hub
CH rudder Pedals
Insignia (NS-P10A710 FLEX 10.1” Android Tablet)used for remote CDU or charts
Mouse (USB)
101 key keyboard (USB)
APC battery backup
Nvidia 496.76
Networked PCs Ethernet cable

Orbx global, a few Orbx regions / and a few payware airports (Orbx and others USA / North America/Europe).
Active Sky , PMDG737, 747, 777 , FSLabs A320X, VRS F/A-18E and other payware aircraft.
P3Dv4 (4.5.14.34698), P3dv5 (5.2.22.27615), Xplane 11.5 and MSFS [2020 (1.21.13.0)].
FSUIPC6, Version 6.1.6 for P3Dv4 and P3dv5.
FFSUIPC7, Version 7.2.12 for MSFS [2020].
Chaseplane
Little Navmap
Navigraph charts
Navigraph Simlink

[MatthijsRoothans]

Alrighty, I think i finnaly got it. Since air flow might be the issue, I decided to test it out today. I removed the glass panel and started testing. And yes! Finally i got some positive news, temps decreased alot to around 65-70 degrees! So my guess goes out that the cpu cooling isnt good enough. I was trying to avoid spending any money but I guess i dont have any other option left. So I will install some water cooling equipment.

Everyone, thanks alot of helping me out! It is appreciated alot!!!

[Sabre57]

Alrighty, I think i finnaly got it. Since air flow might be the issue, I decided to test it out today. I removed the glass panel and started testing. And yes! Finally i got some positive news, temps decreased alot to around 65-70 degrees! So my guess goes out that the cpu cooling isnt good enough. I was trying to avoid spending any money but I guess i dont have any other option left. So I will install some water cooling equipment.

Everyone, thanks alot of helping me out! It is appreciated alot!!!

You could also try to add more case fans first. A general rule of thumb is to have each exhaust fan paired up with one intake fan. For my particular case I have 6, 3 intake and 3 exhaust. Or you could do both, water cooling and additional case fans.

I've also seen extreme measures where folks direct room air conditioning directly into their case. Condensation may become an issue with that though.

[MatthijsRoothans]

Yeah I dont have more place for fans :/. I will install a water cooler, I was thinking of the NZXT kraken X63.

[JorgenSA]

Just make sure that all the fans you have or get are pulling/pushing air in the same direction in the case. If just one us turned the wrong way around you could have an issue.

Jorgen

[MatthijsRoothans]

Yeah i already checked that, the air flow is just really bad in my case. I also saw on the internet that my case actually is designed for water cooling.