Crashes on loading 63%
Crashes on loading 63%
Hi, I'm using P3D v5.2 hf1. Whenever I try to reload the scenario with Fly Chrono sim reloads and crashed on 63%(loading terrain data?). It sometimes happens and whenever I try it again it works. I looked at the event viewer but nothing showed. Any idea here?
Re: Crashes on loading 63%
I looked on the website for Fly Chrono, but could not see anywhere that it was v. 5 compatible.
Saying it is for Prepar3D, which the website does say, is not the same.
Questions for compatibility need to be directed to Fly Chrono support.
Jorgen
Saying it is for Prepar3D, which the website does say, is not the same.
Questions for compatibility need to be directed to Fly Chrono support.
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Crashes on loading 63%
Thanks for the help. I've tried not using flychrono and try time resetting manually thorugh P3D and same thing happened. It crashes on 63%. I don't think this is a problem with Fly Chrono.
Re: Crashes on loading 63%
What are your system specifications?
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Crashes on loading 63%
@ tod1229 ,
Do you crash by just loading the P3D default flight?
Do you crash by just loading the P3D default flight?
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Crashes on loading 63%
Spec is this below link
https://prnt.sc/1r4ctpx
It crashes on reloading I guess default scenario. Like spawning at airport for a flight
https://prnt.sc/1r4ctpx
It crashes on reloading I guess default scenario. Like spawning at airport for a flight
Re: Crashes on loading 63%
The problem is your CPU.
For P3D as minimum a CPU with a clock rate of 3 GHz is required, your CPU runs at 2.6 GHz.
Jorgen
For P3D as minimum a CPU with a clock rate of 3 GHz is required, your CPU runs at 2.6 GHz.
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Crashes on loading 63%
Oh, i I got rex sky force recently and because of that my pc having a hard time I guess. I'll see what I can do. Or deleting sky for will be the only fix?
Re: Crashes on loading 63%
One thing I wonder is that when I try on second time normally it works
Re: Crashes on loading 63%
The problem is that your CPU is below the minimum requirements for P3D v. 5, as found here:
https://www.prepar3d.com/system-requirements/
When that is the case, all bets are off - it may work or not, and support is meaningless.
I am sorry to be so blunt, because I can easily imagine your frustration. But you need to know the facts.
Jorgen
https://www.prepar3d.com/system-requirements/
When that is the case, all bets are off - it may work or not, and support is meaningless.
I am sorry to be so blunt, because I can easily imagine your frustration. But you need to know the facts.
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Crashes on loading 63%
@ tod1229 ,
Your CPU has a Turbo freq of 4.5GHz.
Start P3D and then check the Task Manager (Performance / CPU tabs) to see what speed your CPU is running.
Does it stay in Turbo while P3D is running?
My CPU jumps from 1.5 GHz (now on internet) to Turbo frequency once P3D starts and it stays in Turbo.
Note:
Have you changed the start up default (F35A at KRND) flight?
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Crashes on loading 63%
My CPU normally stay ups at 3.8 or above. https://prnt.sc/1r7iajo
I've tried that on default scenario and it doesn't crash.
I've tried that on default scenario and it doesn't crash.
Re: Crashes on loading 63%
@ tod1229 ,tod1229 wrote: ↑Sat Sep 04, 2021 12:06 pm My CPU normally stay ups at 3.8 or above. https://prnt.sc/1r7iajo
I've tried that on default scenario and it doesn't crash.
Ok, default scenario doesn't crash.
That is good.
One other quick test.
With no Add-ons running for testing.
Start P3D
Load (button)
Select saved scenario
Missing Coworker
Does it load without problems.
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Crashes on loading 63%
Without addons that worked.