I'm not sure if this is related to other problems I've been P3Dv5.3 but it seems P3D isn't shutting down properly. When I choose File/Exit it leaves these two items in the taskbar. One is labeled "Lockheed Martin Prepar3D v5 with Wideserver: waiting for clients", the other "Prepar3D v5 Dialog". Clicking on them doesn't maximize them and I have to manually close them.
Jerry
P3Dv5.3 may not be shutting down properly
P3Dv5.3 may not be shutting down properly
Gigabyte Z390 Aorus
i9-9900K 5.0 GHz
EVGA Liquid CPU Cooler
Gigabyte RTX 3090 TI 24GB
CORSAIR Vengeance LPX 32GB DDR4 3600
Corsair RM1000x psu
Windows 10
(3) Vizio 42" lcd
P3Dv5.3, Prosim737
Opencockpits mcp, 2efis, 2fmc, Ovhd, Radios
i9-9900K 5.0 GHz
EVGA Liquid CPU Cooler
Gigabyte RTX 3090 TI 24GB
CORSAIR Vengeance LPX 32GB DDR4 3600
Corsair RM1000x psu
Windows 10
(3) Vizio 42" lcd
P3Dv5.3, Prosim737
Opencockpits mcp, 2efis, 2fmc, Ovhd, Radios
Re: P3Dv5.3 may not be shutting down properly
Wideserver is related to FSUIPC, you might want to ask Pete Dowson about this one.
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: P3Dv5.3 may not be shutting down properly
Thanks Jorgen, I'll do that.
Jerry
Jerry
Gigabyte Z390 Aorus
i9-9900K 5.0 GHz
EVGA Liquid CPU Cooler
Gigabyte RTX 3090 TI 24GB
CORSAIR Vengeance LPX 32GB DDR4 3600
Corsair RM1000x psu
Windows 10
(3) Vizio 42" lcd
P3Dv5.3, Prosim737
Opencockpits mcp, 2efis, 2fmc, Ovhd, Radios
i9-9900K 5.0 GHz
EVGA Liquid CPU Cooler
Gigabyte RTX 3090 TI 24GB
CORSAIR Vengeance LPX 32GB DDR4 3600
Corsair RM1000x psu
Windows 10
(3) Vizio 42" lcd
P3Dv5.3, Prosim737
Opencockpits mcp, 2efis, 2fmc, Ovhd, Radios
Re: P3Dv5.3 may not be shutting down properly
I contacted Pete and sent him my fsuipc6.log but then I just decided to reinstall p3d. I did a clean install of p3d and then installed only fsuipc. I just discovered something interesting. I'm running an RTX 3080 and have P3D spread across 3 42" lcd screens. If I dock P3D on the left screen all the menus are working properly, also if I dock it on the right screen. But on the middle screen or spread across all three the P3D window goes black when I try to select something from any menu. It was working fine with P3Dv4.5 but when I switched to P3Dv5.3 this started happening. I don't understand what could be different with the middle screen. All three screens are running at 4k x 2k, 4096 x 2160 (native).
Jerry
Jerry
Gigabyte Z390 Aorus
i9-9900K 5.0 GHz
EVGA Liquid CPU Cooler
Gigabyte RTX 3090 TI 24GB
CORSAIR Vengeance LPX 32GB DDR4 3600
Corsair RM1000x psu
Windows 10
(3) Vizio 42" lcd
P3Dv5.3, Prosim737
Opencockpits mcp, 2efis, 2fmc, Ovhd, Radios
i9-9900K 5.0 GHz
EVGA Liquid CPU Cooler
Gigabyte RTX 3090 TI 24GB
CORSAIR Vengeance LPX 32GB DDR4 3600
Corsair RM1000x psu
Windows 10
(3) Vizio 42" lcd
P3Dv5.3, Prosim737
Opencockpits mcp, 2efis, 2fmc, Ovhd, Radios