Just upgraded to v5.2, client only. The Shift-Z function is no longer working.
Is there a new setting somewhere that I have missed?
Cheers,
Mike
Shift-Z not working
- Rob McCarthy
- Lockheed Martin
- Posts: 3703
- Joined: Wed Aug 24, 2011 1:37 pm
Re: Shift-Z not working
Hello,
Refer to this post: https://www.prepar3d.com/forum/viewtopi ... 6&start=15. You will either need to install the updated content package or update the file I posted as a workaround.
Regards,
Rob McCarthy
Refer to this post: https://www.prepar3d.com/forum/viewtopi ... 6&start=15. You will either need to install the updated content package or update the file I posted as a workaround.
Regards,
Rob McCarthy
Rob McCarthy
Prepar3D® Core Lead
Prepar3D® Core Lead
-
- Posts: 21
- Joined: Fri Nov 20, 2020 4:29 pm
Re: Shift-Z not working
Hi,
have the same.
Try if other keys work. "S" Key to toggle view, or "P" for pause.
If not, hit the "CTRL" key once. Check again the above mentioned and Shift+Z
If it works now, minimize the Simulator open a browser and check what happens in the browser command line.
In my case "K" and "5" comes in a row as it was permanently repeated.
I have no idea what is going on here but it would be great to find out if anybody else have this issue.
Thanks
Andreas
have the same.
Try if other keys work. "S" Key to toggle view, or "P" for pause.
If not, hit the "CTRL" key once. Check again the above mentioned and Shift+Z
If it works now, minimize the Simulator open a browser and check what happens in the browser command line.
In my case "K" and "5" comes in a row as it was permanently repeated.
I have no idea what is going on here but it would be great to find out if anybody else have this issue.
Thanks
Andreas
Re: Shift-Z not working
No issue if you install Content also or do full fresh install of 5.2.
webmaster of www.yoyosims.pl
spec: W10, i9 9900K, RTX 3090, 32 RAM | P3Dv5 | VR only: HP Reverb G2
spec: W10, i9 9900K, RTX 3090, 32 RAM | P3Dv5 | VR only: HP Reverb G2
-
- Posts: 21
- Joined: Fri Nov 20, 2020 4:29 pm
Re: Shift-Z not working
Issue solved for me.
FSUIPC was the rootcause of unexpected Key pressing.
Uninstall FSUIPC and reinstall latest version solved it.
Andreas
FSUIPC was the rootcause of unexpected Key pressing.
Uninstall FSUIPC and reinstall latest version solved it.
Andreas
Re: Shift-Z not working
Thank you everyone for the suggestions. The solution for me was Rob McCarthy's new missionpanels.cfg file referred to in his post above.
This new file also activates the messages on the top right side of the screen.
By the way, I really appreciate the new white letters, so much clearer than the old red letters.
Cheers,
Mike
This new file also activates the messages on the top right side of the screen.
By the way, I really appreciate the new white letters, so much clearer than the old red letters.
Cheers,
Mike