No clouds in v5 HF2

[nathantw]

I installed v5.1HF2 and it's raining in YSSY. With EA off it's cloudy and raining. I turned EA on and the sun is blazing down on me without a cloud in the sky. This happens in all other places too.

[keenrw]

I have just had the same thing coming into EGPF .... No clouds with EA on but turn it off and there' are clouds, me and a mate compared pics on the way , both using Active sky .. i got half way and the clouds stopped displaying while in his pics you can see Clouds .. Only difference was EA was on for me, but he had his turned off .

Rich

[keenrw]

To add to the above .... both taken about the same point on the route, as you can see my mate has clouds without EA and my pic shows no clouds using EA .. Both using Active Sky ... and clouds did show up for the departure

[Martyson]

I installed v5.1HF2 and it's raining in YSSY. With EA off it's cloudy and raining. I turned EA on and the sun is blazing down on me without a cloud in the sky. This happens in all other places too.

@ nathantw ,

Are you using a weather program?

[nathantw]

Yes. I’m using Rex Skyforce 3D.

[Martyson]

I installed v5.1HF2 and it's raining in YSSY. With EA off it's cloudy and raining. I turned EA on and the sun is blazing down on me without a cloud in the sky. This happens in all other places too.

@ nathantw ,

You mentioned:
"I installed v5.1HF2 and it's raining in YSSY. With EA off it's cloudy and raining."

How did you do that?

[nathantw]

Rex Skyforce brought in the weather, as you probably guessed. When I turned EA off in the general settings there were clouds and rain. Clicking on the EA box all that rain and cloud goodness disappeared and I was left with sunny, clear skies.

[Martyson]

Rex Skyforce brought in the weather, as you probably guessed. When I turned EA off in the general settings there were clouds and rain. Clicking on the EA box all that rain and cloud goodness disappeared and I was left with sunny, clear skies.

@ nathantw ,

I do not use Skyforce and know nothing about it.

In your situation what should have happened?

Is you situation repeatable?

Without Skyforce on an EA (On) only flight is EA working?

[remcosol]

I am missing a cloud layer, i have deleted the volumetricclouds.cfg ...

[Martyson]

I am missing a cloud layer, i have deleted the volumetricclouds.cfg ...

@ remcosol ,

Not enough information to do a test.

[remcosol]

I am missing a cloud layer, i have deleted the volumetricclouds.cfg ...

@ remcosol ,

Not enough information to do a test.

I was running two layers, or at least tried to. One layer of cumulus and one layer of cirrus. The cumulus worked fine, the cirrus did not show up...

Rebuilding the volumetric clouds. fcg did not help

[Martyson]

I am missing a cloud layer, i have deleted the volumetricclouds.cfg ...

@ remcosol ,

Not enough information to do a test.

I was running two layers, or at least tried to. One layer of cumulus and one layer of cirrus. The cumulus worked fine, the cirrus did not show up...

Rebuilding the volumetric clouds. fcg did not help

@ remcosol ,

Just to verify, are you using P3Dv5HF2 (topic title) or P3Dv5.1 HF1?

[nathantw]

In my case, I messed up the title of the subject. In other words, I screwed the pooch. It should have read "V5.1 HF1."

[Joetsa]

Hello everyone.
The same thing happens to me. If I connect EA, the clouds, rain or snow disappear. If I disconnect EA, everything looks as reported by the METAR of the airport where I am.
I use ActiveSky P3D RC3.
Can someone provide some kind of solution?
Thanks and best regards.

[Martyson]

Hello everyone.
The same thing happens to me. If I connect EA, the clouds, rain or snow disappear. If I disconnect EA, everything looks as reported by the METAR of the airport where I am.
I use ActiveSky P3D RC3.
Can someone provide some kind of solution?
Thanks and best regards.

@ Joetsa ,

Did you load a flight plan into Active Sky (P3Dv5.1 HF1)?