LandClass/Vector Data

Any issues, problems or troubleshooting topics related to the Prepar3D client application.
niksan29
Posts: 136
Joined: Wed Aug 12, 2015 4:14 pm

Re: LandClass/Vector Data

Postby niksan29 » Fri May 08, 2020 5:48 pm

a small broken water polygon at KGGG:

Image
Cheers!

Mischung
Posts: 16
Joined: Sat Dec 07, 2013 6:35 pm

Re: LandClass/Vector Data

Postby Mischung » Sat May 09, 2020 5:27 pm

Ok, that ILS came from our datasource, i'll have to investigate it further, did it exist maybe 10 years ago?
Hi Max,

I just checked the LOC "IRJ" for the airport SBRJ and niksan29 was right as far as it was decommissioned some time ago, but it existed in the past.

Checked some AIRAC cycles I still have on my drive and "IRJ" was still available in 1611, but was removed in 1713.
Please note, that I have no cycles in between, but this was the period it was decommissioned. (It was also included in some old charts, used for a LOC/DME-approach, but no vertical guidance.
Now it was replaced with some RNAV-approaches as niksan29 mentioned.

Hope that helps :-)

Marc

Mischung
Posts: 16
Joined: Sat Dec 07, 2013 6:35 pm

Re: LandClass/Vector Data

Postby Mischung » Sat May 09, 2020 6:01 pm

Image

BIKF has lots of floating airport signs
Hi Zalcantar,

I've recognized the same issue, but this is not a P3D-issue. I suppose your are also using ORBX OPENLC-Europe.

ORBX provided an elevation corrected airport BGL for BIKF. Usually all old airport data should be deleted in such a case, so that no remains of the stock airport can be seen.

In this case they added some "exclusions" into their airport file, but in P3D V5 the airport position slightly changed and so these exclusions, which are created especially for the taxiway-signs, are not working anymore :-(

Here is an exemplary exclusion, defined in the ORBX-version of BIKF:
Image

And that's the taxiway-sign that should be excluded:
Image

Here you can see, that the taxiway-sign coordinates are not withing the exclusion definition of ORBX.
I will head over to the ORBX-forum and post there too...Hopefully this will get fixed.

Marc

Mischung
Posts: 16
Joined: Sat Dec 07, 2013 6:35 pm

Re: LandClass/Vector Data

Postby Mischung » Sat May 09, 2020 6:08 pm

Dear Max,

I've found another problem at SBSP-airport. There's a radar base blocking the taxiway :-)

Coordinates:
Image
Image
Image

Regards

Marc

Mischung
Posts: 16
Joined: Sat Dec 07, 2013 6:35 pm

Re: LandClass/Vector Data

Postby Mischung » Sat May 09, 2020 6:34 pm

Dear Max,

sorry, but I found another issue.

There is some strange mesh-behavior close to SBRJ, which occurs with the stock-mesh and also another 3rd-party mesh, so I suppose it has some other reason.

Location (S22°51.85' W42°49.08'):
Image

It looks like sliced mountains:
Image

Cheers,

Marc

StewieGriffin
Posts: 9
Joined: Wed Apr 22, 2020 5:40 am

Re: LandClass/Vector Data

Postby StewieGriffin » Mon May 11, 2020 10:46 pm

Water polygon sticking out of the Mississippi River. Thanks for listening to and implementing these fixes!

Image

Image

User avatar
Max Perry
Lockheed Martin
Posts: 456
Joined: Tue Sep 14, 2010 1:22 am

Re: LandClass/Vector Data

Postby Max Perry » Tue May 12, 2020 12:38 am

Yeah i'm still checking on this thread and tracking these issues. Thanks to all of you who are helping me check every corner of the world :)

JRBarrett
Posts: 51
Joined: Thu Nov 28, 2013 6:06 pm
Location: Elmira, NY

Re: LandClass/Vector Data

Postby JRBarrett » Tue May 12, 2020 8:33 pm

Detroit KDTW: The 6-mile-long spurious elevated roadway that was attached to the hotel near the McNamara terminal was indeed fixed in HF1, but now there are a bunch of wooden telephone poles on the cargo ramp just west of runway 22L, and on the access taxiways and adjacent grass areas.

Image
Jim Barrett

niksan29
Posts: 136
Joined: Wed Aug 12, 2015 4:14 pm

Re: LandClass/Vector Data

Postby niksan29 » Wed May 13, 2020 6:44 am

Yeah i'm still checking on this thread and tracking these issues.
Hi Max!

thanks for making the sim world better)))
I just wanted to clarify if you added these pro topics to your long list of fixes?:

https://www.prepar3d.com/forum/viewtopi ... 05#p217470
(nearby KGGG)

https://www.prepar3d.com/forum/viewtopi ... 90#p217311
( Add runway 13\31(this is actually a practically new mini airport inside) to the airport OMDW)

https://www.prepar3d.com/forum/viewtopi ... 30#p215320
(the problem of the river in the north of Russia)


and also wanted to ask, what do you think about this?:

https://www.prepar3d.com/forum/viewtopi ... 54#p217621
Cheers!

User avatar
Max Perry
Lockheed Martin
Posts: 456
Joined: Tue Sep 14, 2010 1:22 am

Re: LandClass/Vector Data

Postby Max Perry » Wed May 13, 2020 4:30 pm

I've noted those issues. The new runway will probably have to wait till i get updated formal data in the future.

Floating houses are a rendering/batching issue with the autogen which is not really my area of expertise.

edit: IRL what are those poles at KDTW. FAA has them as a type of electrical tower, not a pole or a radio antennae. Most are either 'telephone/utility' poles.

mcdonoughdr
Posts: 19
Joined: Tue Jun 10, 2014 7:46 pm

Re: LandClass/Vector Data

Postby mcdonoughdr » Wed May 13, 2020 7:48 pm

I've noted those issues. The new runway will probably have to wait till i get updated formal data in the future.

Floating houses are a rendering/batching issue with the autogen which is not really my area of expertise.

edit: IRL what are those poles at KDTW. FAA has them as a type of electrical tower, not a pole or a radio antennae. Most are either 'telephone/utility' poles.
Were you able to fix the terminal size and jetways not attached at PVD?

niksan29
Posts: 136
Joined: Wed Aug 12, 2015 4:14 pm

Re: LandClass/Vector Data

Postby niksan29 » Thu May 14, 2020 11:29 am

The new runway will probably have to wait till i get updated formal data in the future.
Hi!
You are not using navigraph or jeppsen data?
This information(for new runway) has long been available there;)
Floating houses are a rendering/batching issue with the autogen which is not really my area of expertise.
let's hope that responsible specialists will solve this issue;)
Cheers!

JRBarrett
Posts: 51
Joined: Thu Nov 28, 2013 6:06 pm
Location: Elmira, NY

Re: LandClass/Vector Data

Postby JRBarrett » Thu May 14, 2020 1:26 pm


edit: IRL what are those poles at KDTW. FAA has them as a type of electrical tower, not a pole or a radio antennae. Most are either 'telephone/utility' poles.
There are no poles, towers or structures of any kind at KDTW at the location shown. Pre-Covid, I flew out of DTW several times a year as a passenger, and have taxied past that very spot many times. The screenshot is heading northeast on runway 04R, just passing taxiway V, heading toward taxiway Z5. I do most of my test flights out of DTW, and I don’t think those wooden poles were there in the V5 RTM KDTW. They appeared after the spurious roadway coming off of the hotel east of the main terminal was fixed in HF1.

I do use Orbx global textures and OpenLCNA, but no other scenery add-ons.
Jim Barrett

niksan29
Posts: 136
Joined: Wed Aug 12, 2015 4:14 pm

Re: LandClass/Vector Data

Postby niksan29 » Thu May 14, 2020 3:07 pm

They appeared after the spurious roadway coming off of the hotel east of the main terminal was fixed in HF1.
send a screenshot with the coordinates, I will check this;)
Cheers!

GEK_the_Reaper
Posts: 27
Joined: Thu Feb 22, 2018 12:39 pm

Re: LandClass/Vector Data

Postby GEK_the_Reaper » Thu May 14, 2020 5:51 pm

Area of Lake Constance (Germany / Switzerland) is fully flooded!

LAT:N47° 32,79' LON: E9°34,96'

Cities like Bregenz, Dornbirn both in Austria are under watter. The entire valley is submerged.
Gerald Krutsch - Germany

Core i7 4790 / ASUS H87-PRO / MSI GTX 970 / 16 Gb RAM Corsair Vengeance 1600 / 24" Full HD.

WIN 10 HOME 64 + P3D v4 + GEP3D + UTX Europe + FS Global UNG + ORBXTreesHD+ ASP4+ ASCA+ ENVTEX+ ENVSHADE+ GSX+ ChasePlane


Return to “Prepar3D Client Application Questions”

Who is online

Users browsing this forum: Bing [Bot] and 105 guests