p3d v5 CTD Aerosoft a330 D3D10Warp.dll

[Opensky101]

Hi all,

I've recently purchased a new system and have flown multiple flights with the Aerosoft a320 pro. However, when using the a330 pro, I have CTD'd multiple times with D3D10Warp.dll being the culprit.

Not being fully accustomed to using the PC yet, I can only give the details from event viewer.

Faulting application name: Prepar3D.exe, version: 5.0.31.35253, time stamp: 0x5eebf566
Faulting module name: D3D10Warp.dll, version: 10.0.18362.356, time stamp: 0x3ff1131a
Exception code: 0xc0000005
Fault offset: 0x00000000000abd80
Faulting process ID: 0x208c
Faulting application start time: 0x01d659bae1b6cf22
Faulting application path: C:\Program Files\Lockheed Martin\Prepar3D v5\Prepar3D.exe
Faulting module path: C:\windows\SYSTEM32\D3D10Warp.dll
Report ID: 0603301b-a575-409d-80e5-54beb2667730
Faulting package full name:
Faulting package-relative application ID:

I've seen this issue across other forums but no obvious fix, is it an Aerosoft issue?

System Specs
Intel i9-10920X 3.50GHz OC'd to 4.8GHz
Nvidia 2080 TI 11GB
32gb Corsair RAM

[Martyson]

Good idea to ask Aerosoft.

@ Opensky101,

e.g., :
https://forum.aerosoft.com/index.php?/t ... dll-error/

[MPO910]

Try disabling the ND display renedering option in the a330 cfg tool. Uncheck the box (I can not recall the exact name of the box. But it says something like it is to check if your gpu is not strong enough for rendering some displays of the cockpit, it will shift workload from your gpu to cpu). I did uncheck it, these ctd never occur again. I did report it at aerosoft, but they answererd the problem was on my end, because no one else did report it......

[JorgenSA]

What does Aerosoft say about the GPU requirements? The OP has a GTX 2080 TI with 11 GB on it....

Jorgen

[MPO910]

Try disabling the ND display renedering option in the a330 cfg tool. Uncheck the box (I can not recall the exact name of the box. But it says something like it is to check if your gpu is not strong enough for rendering some displays of the cockpit, it will shift workload from your gpu to cpu). I did uncheck it, these ctd never occur again. I did report it at aerosoft, but they answererd the problem was on my end, because no one else did report it......

UPDATE: Checkbox wich I unchekced name is: Force ECAM Software Rendering.

And I have a 10900k with 10 Cores on 5.0GhZ and a RTX Titan 24GB

[Opensky101]

Thanks for the replies.

I've disabled the ECAM rendering tool and will give it a try.

I'm surprised it's been happening to cards far superior to mine as well!

[Martyson]

Thanks for the replies.

I've disabled the ECAM rendering tool and will give it a try.

I'm surprised it's been happening to cards far superior to mine as well!

@ Opensky101,

Your are welcome.

Good idea to ask Aerosoft.

e.g., :
https://forum.aerosoft.com/index.php?/t ... dll-error/

[MPO910]

It is already done! Aerosoft says it can not be possible that it is related to their addon, it must be something on the user end ergo Windows 10.

One user did even a clean install of:
- Windows
- P3D
- Aerosoft A330
and has this issue as well. He had MS Support and installed from scratch....issue still persists!

I am a little speachless that the thread on Aerosoft has bin closed with the remark: Answered.......answered is not solved.

I am asking myself if it is possbile that the "AS330 Product code has some issues wich lead to the error? MUST it be Windows? Or can it be the product too wich has issues which lead do windows .dll failures/errors?

Marcus

[Martyson]

It is already done! Aerosoft says it can not be possible that it is related to their addon, it must be something on the user end ergo Windows 10.

One user did even a clean install of:
- Windows
- P3D
- Aerosoft A330
and has this issue as well. He had MS Support and installed from scratch....issue still persists!

I am a little speachless that the thread on Aerosoft has bin closed with the remark: Answered.......answered is not solved.

I am asking myself if it is possbile that the "AS330 Product code has some issues wich lead to the error? MUST it be Windows? Or can it be the product too wich has issues which lead do windows .dll failures/errors?

Marcus

Marcus,

“I am a little speachless that the thread on Aerosoft has bin closed with the remark: Answered.......answered is not solved.”

On the last page of the post I linked :
“Because we believe this topic has been answered we have closed it. If you have any more questions feel free to open a new topic. “

So, you can start a new topic in the correct Aerosoft forum area and use problem e.g.,
P3Dv5HF2 CTD Aerosoft a330 D3D10Warp.dll

[Bingobango]

@opensky101

Did you resolve the crash with D3D10WARP.DLL? I just had it myself with Aero soft A330 also.

[Blaunarwal]

Faulting application name: Prepar3D.exe, version: 5.0.31.35253, time stamp: 0x5eebf566

How about updating your Prepar3D to the most recent version, which is 5.1 HF1 (don't know the number by heart).

The addons often get evolved, so if you use an older version of the sim and the latest of the addon, it might be a problem.

Regards

Dan