Hello Martyson,
FDS is Flight Deck Solutions. They are in Canada and I have their MCP for the B777. It is absolutely brilliant. It is set up as a USB plug and play unit and works very well. Expensive but it was worth it.
Regards,
Ron
Power up but no motion
Re: Power up but no motion
Hello Maryson,
I am not sure if my last response went through as it does not appear in the list of posts.
Just in case I have copied it below:-
Re: Power up but no motion
by ronbull » Tue May 17, 2022 11:36 am
Hello Martyson,
FDS is Flight Deck Solutions. They are in Canada and I have their MCP for the B777. It is absolutely brilliant. It is set up as a USB plug and play unit and works very well. Expensive but it was worth it.
Regards,
Ron
I am not sure if my last response went through as it does not appear in the list of posts.
Just in case I have copied it below:-
Re: Power up but no motion
by ronbull » Tue May 17, 2022 11:36 am
Hello Martyson,
FDS is Flight Deck Solutions. They are in Canada and I have their MCP for the B777. It is absolutely brilliant. It is set up as a USB plug and play unit and works very well. Expensive but it was worth it.
Regards,
Ron
Re: Power up but no motion
Hello ronbull ,
Previously you mentioned :
PMDG, FDS, CH Controls and P3D
What is CH Controls?
Previously you mentioned :
PMDG, FDS, CH Controls and P3D
What is CH Controls?
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Power up but no motion
Hello Martyson,
CH Products market sim controls.
http://www.chproducts.com/Flight-Sim-Yo ... d-705.html
I have their brake and rudder pedal controls.
Regards,
Ron
CH Products market sim controls.
http://www.chproducts.com/Flight-Sim-Yo ... d-705.html
I have their brake and rudder pedal controls.
Regards,
Ron
Re: Power up but no motion
Hi Hello ronbull ,
I have CH Pro Pedals controlled by FSUIPC and all OK.
I do not have CH Yoke / Throttles.
Unplug all your USB's for the Yoke, Throttles and Pedals.
Reboot PC.
Start P3D, default flight and see if keyboard controls work for taxi.
I have CH Pro Pedals controlled by FSUIPC and all OK.
I do not have CH Yoke / Throttles.
Unplug all your USB's for the Yoke, Throttles and Pedals.
Reboot PC.
Start P3D, default flight and see if keyboard controls work for taxi.
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: Power up but no motion
Martyson,
I found the problem.
I disconnected the CH Pedal controls to see if they were causing the problem. When I did, I had no problem with taxiing.
So I bit the bullet and bought a new set Logitech pedals. So now I am back to normal operation.
Thank you for your efforts and thoughts.
Regards,
Ron
I found the problem.
I disconnected the CH Pedal controls to see if they were causing the problem. When I did, I had no problem with taxiing.
So I bit the bullet and bought a new set Logitech pedals. So now I am back to normal operation.
Thank you for your efforts and thoughts.
Regards,
Ron
Re: Power up but no motion
Hello ronbull ,
You are welcome.
Glad to hear your problem is resolved.
You are welcome.
Glad to hear your problem is resolved.
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)