Reporting Scenery Errors in Ecuador P3D5.2 HF1
- Blaunarwal
- Posts: 535
- Joined: Tue Jun 12, 2012 1:37 pm
- Location: LSZH
- Contact:
Reporting Scenery Errors in Ecuador P3D5.2 HF1
Recently I encountered two places with spikes and a lake not level:
This is close to SESA Airport S2° 12.87' W80° 57.17'
This is near SEGU Airport at S2° 12.37" W80° 1.32
and a lake with canyons near SEGU at S2° 12.42" W80° 5.97"
Here´s a little scenery fix made by myself in case someone wants it
https://drive.google.com/drive/folders/ ... sp=sharing
Don´t know, if my data is corrupted or if this mesh is just bad. I disabled other mesh for testing. This is vanilla P3D5.2 HF1
Regards
Dan
This is close to SESA Airport S2° 12.87' W80° 57.17'
This is near SEGU Airport at S2° 12.37" W80° 1.32
and a lake with canyons near SEGU at S2° 12.42" W80° 5.97"
Here´s a little scenery fix made by myself in case someone wants it
https://drive.google.com/drive/folders/ ... sp=sharing
Don´t know, if my data is corrupted or if this mesh is just bad. I disabled other mesh for testing. This is vanilla P3D5.2 HF1
Regards
Dan
i7- 13900K, 64 GB DDR-5 SDRAM, Gigabyte Aorus Z790 Elite AX, KFA2 GeForce RTX 3090 SG 1-Click OC (24GB)
https://sites.google.com/view/dans-p3d-mods
https://sites.google.com/view/dans-p3d-mods
Re: Reporting Scenery Errors in Ecuador P3D5.2 HF1
Hi
Same here at S2° 12.42" W80° 5.97"
Regards
Michel
Same here at S2° 12.42" W80° 5.97"
Regards
Michel
Re: Reporting Scenery Errors in Ecuador P3D5.2 HF1
I'll look into it and fix it if needed, thanks for letting us know!
Re: Reporting Scenery Errors in Ecuador P3D5.2 HF1
Thank you very much Max
Have also a look here:
https://www.prepar3d.com/forum/viewtopi ... 2&t=143862
Regards
Michel
Have also a look here:
https://www.prepar3d.com/forum/viewtopi ... 2&t=143862
Regards
Michel
Re: Reporting Scenery Errors in Ecuador P3D5.2 HF1
Hey, so I don't see these in my development build. I haven't fixed anything here since 5.2 so I don't know what's wrong yet. The terrain spikes like that can be caused by water set to bad elevations, so I don't think it's the terrain mesh.
Re: Reporting Scenery Errors in Ecuador P3D5.2 HF1
Max,
For what it it worth, I had "spikes" like that in FSX (also called artifacts). They went away with buffering in FSX.CFG, but the system I had back then was not very powerful.
Jorgen
For what it it worth, I had "spikes" like that in FSX (also called artifacts). They went away with buffering in FSX.CFG, but the system I had back then was not very powerful.
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: Reporting Scenery Errors in Ecuador P3D5.2 HF1
Hi Max
Have also a look near SEGU at S2° 12.42" W80° 5.97"
Regards
Michel
Have also a look near SEGU at S2° 12.42" W80° 5.97"
Regards
Michel
- Blaunarwal
- Posts: 535
- Joined: Tue Jun 12, 2012 1:37 pm
- Location: LSZH
- Contact:
Re: Reporting Scenery Errors in Ecuador P3D5.2 HF1
I just disabled ORBX mesh in that area, but not their landclass and the spikes and the lake remained unchanged. I thought it must be a mesh spike. Since we are already two having this, it can not be a false value due to a transfer failure.
i7- 13900K, 64 GB DDR-5 SDRAM, Gigabyte Aorus Z790 Elite AX, KFA2 GeForce RTX 3090 SG 1-Click OC (24GB)
https://sites.google.com/view/dans-p3d-mods
https://sites.google.com/view/dans-p3d-mods
Re: Reporting Scenery Errors in Ecuador P3D5.2 HF1
Fly directly over the top of the spikes, and see if there is a giant hole or a peak of the spike, maybe you will see the tiny water feature that is not set to the correct DEM elevation. Out of curiosity, have you tried 5.3 yet?
Re: Reporting Scenery Errors in Ecuador P3D5.2 HF1
Max -- were there corrections made in 5.3 for scenery? The version history doesn't mention any.
Keep up the good work!
Gigabyte x670 Aorus Elite AX MB; 7800X3D CPU; Deepcool LT520 Cooler; 64 Gb G.Skill Trident Z5 NEO DDR5; Win11 Pro; 1 Samsung 990 2Tb NVMe SSD: 1 Crucial 4Tb MX500 SSD; 1 Samsung 860 1Tb SSD; Gigabyte 1080ti 11Gb VRAM; Toshiba 43" LED TV @ 4k..
- Blaunarwal
- Posts: 535
- Joined: Tue Jun 12, 2012 1:37 pm
- Location: LSZH
- Contact:
Re: Reporting Scenery Errors in Ecuador P3D5.2 HF1
The spikes are still there with 5.3. There´s no lake on the ground. That´s the one near Salinas SESA.
There´s a hole in the ground in the middle of the spikes, but no water. The area on the ground is small, can´t go completely down with the plane in slew mode.
With my patch it is flat as it should be.
I installed 5.3 today and it feels more fluent than before. However texture loading is still an issue. Black objects when turning around.
i7- 13900K, 64 GB DDR-5 SDRAM, Gigabyte Aorus Z790 Elite AX, KFA2 GeForce RTX 3090 SG 1-Click OC (24GB)
https://sites.google.com/view/dans-p3d-mods
https://sites.google.com/view/dans-p3d-mods
- Blaunarwal
- Posts: 535
- Joined: Tue Jun 12, 2012 1:37 pm
- Location: LSZH
- Contact:
Re: Reporting Scenery Errors in Ecuador P3D5.3
There´s one more discovered today
S2° 8.53' W80° 46.07'
I´ll update my patch.
S2° 8.53' W80° 46.07'
I´ll update my patch.
i7- 13900K, 64 GB DDR-5 SDRAM, Gigabyte Aorus Z790 Elite AX, KFA2 GeForce RTX 3090 SG 1-Click OC (24GB)
https://sites.google.com/view/dans-p3d-mods
https://sites.google.com/view/dans-p3d-mods