P3D v5 HF2 CTD .NET runtime Error
P3D v5 HF2 CTD .NET runtime Error
Hi guys,
I also keep getting CTD's with v5 HF2 since last week, I haven't changed anything, but now I get random crashes. Shortly after the crash I get a .NET runtime error (see picture below). In the eventviewer always KERNELBASE.dll is the faulting module.
Is there a problem with the Simconnect device? Is it possibe, that the update of MSFS 2020 last week messed anything up (as it uses Simconnect too afaik)?
I also keep getting CTD's with v5 HF2 since last week, I haven't changed anything, but now I get random crashes. Shortly after the crash I get a .NET runtime error (see picture below). In the eventviewer always KERNELBASE.dll is the faulting module.
Is there a problem with the Simconnect device? Is it possibe, that the update of MSFS 2020 last week messed anything up (as it uses Simconnect too afaik)?
Re: P3D v5 HF2 CTD .NET runtime Error
@ medic89 ,
To try to isolate what is causing the CTD
Look in the Windows Event Viewer and get the
Faulting Module Name
example:
To try to isolate what is causing the CTD
Look in the Windows Event Viewer and get the
Faulting Module Name
example:
Best Regards,
Vaughan Martell PP-ASEL (KDTW)
Vaughan Martell PP-ASEL (KDTW)
Re: P3D v5 HF2 CTD .NET runtime Error
Faulting module name is KERNELBASE.dll, version: 10.0.19041.488.
Re: P3D v5 HF2 CTD .NET runtime Error
You are using PMDG 777? If that is the case, this plane is not supportet in P3DV5 now, either would LM support this bug as you are probably using a not compatible addon.
Marcus
Marcus
Marcus P
Windows 10 Home 21H1
Build 19043.1586
Feature Exp. Pack 120.2212.4170.0
i9 10900K @ 5.0 Ghz | HT OFF | 1.32V
Mainboard ASUS ROG Maximus XII Formula Z490
32 GB RAM 3600 Mhz
RTX 3090 24GB
32" Samsung UHD Monitor
HP Reverb G2 VR HMD | Steam VR
Windows 10 Home 21H1
Build 19043.1586
Feature Exp. Pack 120.2212.4170.0
i9 10900K @ 5.0 Ghz | HT OFF | 1.32V
Mainboard ASUS ROG Maximus XII Formula Z490
32 GB RAM 3600 Mhz
RTX 3090 24GB
32" Samsung UHD Monitor
HP Reverb G2 VR HMD | Steam VR
Re: P3D v5 HF2 CTD .NET runtime Error
Im using the FSLabs A320, i don't have any other airplanes installed yet.
Re: P3D v5 HF2 CTD .NET runtime Error
I´ve had a similar issue of CTD´s out off a sudden, where my Sim was always running very stable. Then i remember that the last 2 or 3 WIN 10 update rounds from MS, there where also updates for NET.Framework. I have re- installed simconnect and also ASP3D to force a re-install of their connector. Since then everything runs stable again.medic89 wrote: ↑Mon Sep 21, 2020 10:00 am Hi guys,
I also keep getting CTD's with v5 HF2 since last week, I haven't changed anything, but now I get random crashes. Shortly after the crash I get a .NET runtime error (see picture below). In the eventviewer always KERNELBASE.dll is the faulting module.
After the NetFramework update there was aslo an issue with the last NVidia driver as MS mentioned in their tech forum. I got a CTD related to the Video Card. I guess this is why the driver was updated last weekend by NVidia and now everything is ok again.
P3D V6 & 5.4 - PC spec: Intel i9-9900 overclocked 5 GHz HT off, 32 GB RAM, GPU Nvidia RTX3090 24GB, 2xM2 SSD, Skalarki HomeCockpit and Jeehell FMGS on a dedicated Server, PF3 for ATC, MCE, GSX, EFB, AS+ASCA+ENV and OrbX
Re: P3D v5 HF2 CTD .NET runtime Error
How did yo reinstall simconnect? I'm having same problem since 1 week ago tooBerndB wrote: ↑Tue Sep 22, 2020 8:04 pmI´ve had a similar issue of CTD´s out off a sudden, where my Sim was always running very stable. Then i remember that the last 2 or 3 WIN 10 update rounds from MS, there where also updates for NET.Framework. I have re- installed simconnect and also ASP3D to force a re-install of their connector. Since then everything runs stable again.medic89 wrote: ↑Mon Sep 21, 2020 10:00 am Hi guys,
I also keep getting CTD's with v5 HF2 since last week, I haven't changed anything, but now I get random crashes. Shortly after the crash I get a .NET runtime error (see picture below). In the eventviewer always KERNELBASE.dll is the faulting module.
After the NetFramework update there was aslo an issue with the last NVidia driver as MS mentioned in their tech forum. I got a CTD related to the Video Card. I guess this is why the driver was updated last weekend by NVidia and now everything is ok again.
Re: P3D v5 HF2 CTD .NET runtime Error
In your P3D folder, go into the \redist folder, and then to the \Interface folder. In that, you should find 6 folders. Go through all of them and their subfolders, and when you see a Simconnect.msi, run it. There should be a total of 6 of these. In my case, one of these aborted installation, and another said it was already installed, but 4 just ran.
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: P3D v5 HF2 CTD .NET runtime Error
Thank you sir, i'll give it a tryJorgenSA wrote: ↑Wed Sep 23, 2020 5:20 pm In your P3D folder, go into the \redist folder, and then to the \Interface folder. In that, you should find 6 folders. Go through all of them and their subfolders, and when you see a Simconnect.msi, run it. There should be a total of 6 of these. In my case, one of these aborted installation, and another said it was already installed, but 4 just ran.
Jorgen
Re: P3D v5 HF2 CTD .NET runtime Error
Allright, this is what I've done so far:
- Remove all GPU driver and reinstall them (without Geforce experience)
- Reinstall Active Sky as well as its connector
- Reinstall all six Simconnect MSI files
So far, I hadn't had any crashes yet.
@Devs: What do you guys think about this CTD's?
- Remove all GPU driver and reinstall them (without Geforce experience)
- Reinstall Active Sky as well as its connector
- Reinstall all six Simconnect MSI files
So far, I hadn't had any crashes yet.
@Devs: What do you guys think about this CTD's?
Re: P3D v5 HF2 CTD .NET runtime Error
i personally warmly suggest to install the SimConnect for FSX SP2 only. I´ve also had installed all versions and ran into trouble with some add-ons. Indeed P3D 4.5 and V5 only needs the FSX SP2 version once.Gaz wrote: ↑Wed Sep 23, 2020 5:22 pmThank you sir, i'll give it a tryJorgenSA wrote: ↑Wed Sep 23, 2020 5:20 pm In your P3D folder, go into the \redist folder, and then to the \Interface folder. In that, you should find 6 folders. Go through all of them and their subfolders, and when you see a Simconnect.msi, run it. There should be a total of 6 of these. In my case, one of these aborted installation, and another said it was already installed, but 4 just ran.
Jorgen
P3D V6 & 5.4 - PC spec: Intel i9-9900 overclocked 5 GHz HT off, 32 GB RAM, GPU Nvidia RTX3090 24GB, 2xM2 SSD, Skalarki HomeCockpit and Jeehell FMGS on a dedicated Server, PF3 for ATC, MCE, GSX, EFB, AS+ASCA+ENV and OrbX
Re: P3D v5 HF2 CTD .NET runtime Error
OK I kept testing and this issue isn't resolved at all. Whenever I get one of those CTD's, it's always caused by KERNEBLASE.dll, the only workaround is to uninstall and reinstall die FSX SP2 Simconnect.
Re: P3D v5 HF2 CTD .NET runtime Error
What graphics card do you have in your system?
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
Re: P3D v5 HF2 CTD .NET runtime Error
I have a GTX 1080 with NVIDIA driver 452.06 without GeForce Experience (however I had the same issue with 451.67). My VRAM isn't even close to 50% of maximum.
Re: P3D v5 HF2 CTD .NET runtime Error
Update your driver. The latest version is 456.38. And whether you use GeForce Experience or not to update it does not matter.
Jorgen
Jorgen
System: i5-12600K@4.9 GHz, ASUS ROG STRIX Z690-I motherboard, 32 GB 4800 MHz DDR5 RAM, Gainward RTX 3060 w/ 12 GB DDR6 VRAM, Windows 10 Pro.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.
All views and opinions expressed here are entirely my own. I am not a Lockheed-Martin employee.