Compilation of Scenery Errors

Any issues, problems or troubleshooting topics related to the Prepar3D client application.
Pricetx
Posts: 8
Joined: Mon Apr 02, 2012 7:37 pm

Postby Pricetx » Wed Apr 04, 2012 6:02 pm

Considering that Prepar3d is being actively developed and improved. I thought it would be useful to point out some of the scenery errors which have been inherited from ESP. If you know of any which aren’t listed below, please submit them so I can generate a comprehensive list.



Greenland:



There is an elevation error in Greenland which causes huge spikes to rise out of the ground. Additionally, in the centre of these spikes is an area of ground over 100,000 ft below sea level.



Greenland%20-%201.png

Greenland%20-%202.png



Near KEVW:



Close to this airport is a spike similar to the previous one, however this one is only around 16,000 ft high with no hole associated with it.



KEVW%20-%201.png



ENDI:



This airport is surrounded by large, steep cliffs, apparent elevation errors.

ENDI%20-%201.png



SVAS:



Similar to ENDI, this airport is in a large hole in the ground.

SVAS%20-1.png



FBKE:



Similarly to the previous two, this airport appears to be located in a large crater, which it isn’t in reality (source: http://www.youtube.com/watch?v=67uES6mzy4I)

FBKE%20-%201.png



9AK8:



The runway for this airport is a few thousand feet below the surface of the ground. This screenshot shows a viewpoint looking up at the ground from underneath.

9AK8%20-%201.png



CBZ3:



The runway at this airport seems to have split into three sections. Additionally, there is a building on the runway.

CBZ3%20-%201.png

CBZ3%20-%202.png



EGUW:



In the very middle of the runway there is an ATC tower.

EGUW%20-%201.png



MCBZ:



This airport has trees covering the runway.



MZBZ%20-%201.png



NRQ:



As you can see from the image, this airport has a very unusual runway layout. When you look at this airport in Google maps it turns out to be a series of helipads linked by taxiways, NOT 8 runways as depicted by Prepar3d. To see this airport in google maps paste “30.625468,-87.139907” into the search box.



NRQ%20-%201.png



S28:



Elevation errors producing large hole in ground.



S28%20-%201.png



SVAS:



Elevation error has caused this airport to be in a large hole. The elevation is relatively flat in reality as evidenced by this photograph: http://www.dot.state.ak.us/stwdav/images/Alakanuk2007.JPG

SVAS%20-1.png



WAJJ:



The lake at this airport is too high. The result of this is that the ILS approach for the runway will cause you to fly into the lake itself. The first image shows how steep the approach has to be to avoid the lake, and the second shot shows the glideslope when I am in this position.

WAJJ%20-%201.png

WAJJ%20-%202.png



WN23:



This airport doesn’t have anything graphically wrong with it. However, it is a single grass runway yet is listed as an international airport. Image below:

WN23%20-%201.png



YXFV:



This airport has a very short runway. Additionally, the runway markings are in the centre of the runway and overlap each other. Further to this, there is a tower on the runway. If you search “newcastle westpac base heliport” on Google maps you will find that the airport is infact a heliport with no runway.

YXFV%20-%201.png

YXFV%20-%202.png






As I said at the beginning if the post, I would be extremely grateful if others could post any scenery issues they have discovered with Prepar3d so that the developers can be made aware of them.

User avatar
Max Perry
Lockheed Martin
Posts: 203
Joined: Tue Sep 14, 2010 1:22 am

Postby Max Perry » Wed Apr 04, 2012 9:38 pm

Thanks for such a good documented list and with screenshots this will make it a lot easier to address these in the future.

Burkhard
Posts: 185
Joined: Tue Nov 22, 2011 7:51 am

Postby Burkhard » Thu Apr 05, 2012 6:25 am

To those who fix it, I found out with FSX that all wrong airport elevations are just mix-ups of feet and meter, same applies to some extreme lakes. That makes it very easy to fix.

Pricetx
Posts: 8
Joined: Mon Apr 02, 2012 7:37 pm

Postby Pricetx » Thu Apr 05, 2012 1:18 pm

I've discovered a few more issues to add to this list, which are featured below:



Tanzania:



This is a very strange occurrence. There is a very large (several KM long) “V” shaped valley in Tanzania. At the bottom of this valley there is a strip which resembles some sort of dirt runway or road. My screenshots can explain it better than I can in words so please see below. (co-ordinates are included in the screenshots)

Tanzania%20-%201.png

Tanzania%20-%202.png

Tanzania%20-%203.png

Tanzania%20-%204.png

Tanzania%20-%205.png



FV76:



This airport has an issue with being inside a large crater like many of the other airports i’ve mentioned. However, this airport is unusual in that the runway is at the correct height still, meaning that it is floating in the air, as can be seen in the screenshot.



FV76%20-%201.png



FAHS:



This airport has two runways. One of them is fine. However the other one is floating above a large hole, see screenshot.



FAHS%20-%201.png



KMAE:



This airport has a terminal building in the middle of one of the runways.



KMAE%20-%201.png

Legacy Support
Posts: 474
Joined: Mon Aug 16, 2010 7:22 pm

Postby Legacy Support » Thu Apr 05, 2012 1:48 pm

Just a quick one. If you enclose the image URLs with the image tag, the pix will show up in the forum post. This is either by typing img and /img enclosed in square brackets, or using the image button in the post editing toolbar. img.png

Pricetx
Posts: 8
Joined: Mon Apr 02, 2012 7:37 pm

Postby Pricetx » Thu Apr 05, 2012 5:17 pm

Thank you John. I have now updated my posts as you recommended.

User avatar
Max Perry
Lockheed Martin
Posts: 203
Joined: Tue Sep 14, 2010 1:22 am

Postby Max Perry » Mon May 07, 2012 10:01 pm

Fixing these now, it's like being a world traveler!

Alex Goff
Posts: 55
Joined: Fri Jan 06, 2012 5:14 am

Postby Alex Goff » Thu May 10, 2012 6:57 pm

Note that WN23 is actually an international airport, if in name only.



WN23 Grand View International Airport



http://airnav.com/airport/WN23
Alex Goff
Orbx Simulation Systems

FSMP
Posts: 678
Joined: Sat Sep 25, 2010 9:38 am

Postby FSMP » Fri May 11, 2012 7:03 am

International Airport lol



From AirNav:

Airport Operational Statistics

Aircraft based on the field: 1

Single engine airplanes: 1




User avatar
Max Perry
Lockheed Martin
Posts: 203
Joined: Tue Sep 14, 2010 1:22 am

Postby Max Perry » Mon May 14, 2012 2:12 pm

Yes, I am not going to change the name of WN23 ;). I've noticed a handful of very small "international airports" in the database.



Also note that NRQ is actually 8 runways, (I lined these up for FSX, look for this airport in FS2004 to see the difference) but in reality they have been painted over to look more like the helipads you see in satellite / aerial imagery. I'm leaving this for a talented add-on dev to take on. The inner artist in me must resist ;) and move on. I'll post some more updates soon.









Return to “Prepar3D Client Application Questions”

Who is online

Users browsing this forum: No registered users and 11 guests