P3D v5 HF2 controls stop responding after 7 hours

Any issues, problems or troubleshooting topics related to the Prepar3D client application.
Nikolaj Delaney
Posts: 5
Joined: Tue Jun 30, 2020 10:07 pm

Re: P3D v5 HF2 controls stop responding after 7 hours

Postby Nikolaj Delaney » Fri Oct 09, 2020 4:51 pm

Did you get this error with a default P3D install when first testing the default setup before any Add-ons?
https://1drv.ms/u/s!Ajwir6sTKzZQ5-5ACsc ... w?e=jKpoaK here's the test log

User avatar
Martyson
Posts: 10002
Joined: Sun Mar 25, 2012 11:08 am

Re: P3D v5 HF2 controls stop responding after 7 hours

Postby Martyson » Fri Oct 09, 2020 5:39 pm

Did you get this error with a default P3D install when first testing the default setup before any Add-ons?
https://1drv.ms/u/s!Ajwir6sTKzZQ5-5ACsc ... w?e=jKpoaK here's the test log
@ Nikolaj Delaney ,

I did a screenshot of your log for you for the forum:

Image
Best Regards,
Vaughan Martell (KDTW)

Nikolaj Delaney
Posts: 5
Joined: Tue Jun 30, 2020 10:07 pm

Re: P3D v5 HF2 controls stop responding after 7 hours

Postby Nikolaj Delaney » Fri Oct 09, 2020 7:36 pm

Thanks I didn't know how to do that.

Anyway in my previous testing the issue did not manifest when I disabled all addons.

Aviator1979
Posts: 70
Joined: Tue Dec 25, 2012 8:05 pm

Re: P3D v5 HF2 controls stop responding after 7 hours

Postby Aviator1979 » Sat Nov 07, 2020 1:18 am

i also have this for several months, happened again now, is there any news? fsuipc log indicates simconnect stops responding. i was 7 hours in flight over the atlantic and suddenly no control over airplane and banking to the right off the flightplan (pmdg 747) ezca didnt work anymore, vpilot stated that simulator is not running anymore,no acces to menus etc.. simconnect issue p3d5 hf2, is it solved in 5.1? thx

User avatar
Martyson
Posts: 10002
Joined: Sun Mar 25, 2012 11:08 am

Re: P3D v5 HF2 controls stop responding after 7 hours

Postby Martyson » Sat Nov 07, 2020 2:09 am

i also have this for several months, happened again now, is there any news? fsuipc log indicates simconnect stops responding. i was 7 hours in flight over the atlantic and suddenly no control over airplane and banking to the right off the flightplan (pmdg 747) ezca didnt work anymore, vpilot stated that simulator is not running anymore,no acces to menus etc.. simconnect issue p3d5 hf2, is it solved in 5.1? thx
@ Aviator1979 ,

During your flight had you used PMDG's or the Sims time compression?

Did the engines shut down ?

Did the autopilot disconnect?

Have you asked at PMDG support forum?
Best Regards,
Vaughan Martell (KDTW)

Aviator1979
Posts: 70
Joined: Tue Dec 25, 2012 8:05 pm

Re: P3D v5 HF2 controls stop responding after 7 hours

Postby Aviator1979 » Sat Nov 07, 2020 9:21 am

i also have this for several months, happened again now, is there any news? fsuipc log indicates simconnect stops responding. i was 7 hours in flight over the atlantic and suddenly no control over airplane and banking to the right off the flightplan (pmdg 747) ezca didnt work anymore, vpilot stated that simulator is not running anymore,no acces to menus etc.. simconnect issue p3d5 hf2, is it solved in 5.1? thx
@ Aviator1979 ,

During your flight had you used PMDG's or the Sims time compression?

Did the engines shut down ?

Did the autopilot disconnect?

Have you asked at PMDG support forum?
hy Martyson , no time compression, engines were not shutting down, and the autopilot stays connected.

User avatar
Martyson
Posts: 10002
Joined: Sun Mar 25, 2012 11:08 am

Re: P3D v5 HF2 controls stop responding after 7 hours

Postby Martyson » Sat Nov 07, 2020 9:35 am

i also have this for several months, happened again now, is there any news? fsuipc log indicates simconnect stops responding. i was 7 hours in flight over the atlantic and suddenly no control over airplane and banking to the right off the flightplan (pmdg 747) ezca didnt work anymore, vpilot stated that simulator is not running anymore,no acces to menus etc.. simconnect issue p3d5 hf2, is it solved in 5.1? thx
@ Aviator1979 ,

During your flight had you used PMDG's or the Sims time compression?

Did the engines shut down ?

Did the autopilot disconnect?

Have you asked at PMDG support forum?
hy Martyson , no time compression, engines were not shutting down, and the autopilot stays connected.
@ Aviator1979 ,

Have you tested with just a PMDG aircraft and no extras ( noWx program, no FSUIPC logs or FSUIPC saving flights, no vpilot etc)?

Have you had any flight greater than 7 hours that did not fail?

Have you asked at PMDG support forum?
Best Regards,
Vaughan Martell (KDTW)

Aviator1979
Posts: 70
Joined: Tue Dec 25, 2012 8:05 pm

Re: P3D v5 HF2 controls stop responding after 7 hours

Postby Aviator1979 » Sat Nov 07, 2020 2:39 pm

hy Martyson no i didnt try with no addons, maybe its pmdg like this forum

https://forum.pmdg.com/forum/main-forum ... 37-and-747

i need to disable addons maybe like you suggest, thx for the info, greets


Return to “Prepar3D Client Application Questions”

Who is online

Users browsing this forum: No registered users and 101 guests