Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868

Forum Rules & News
User avatar
Poppet
Lockheed Martin
Posts: 2099
Joined: Sat Nov 01, 2014 4:12 pm

Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868

Postby Poppet » Wed Feb 01, 2017 8:35 pm

Prepar3D v3.4 Hotfix 3 – SLI Update has been released and ready to Install v 3.4.22.19868

This hotfix is to address reported issues and incompatibilities with SLI mode of NVIDIA hardware

Please Read the Releases Notes: Fixes and Improvements Release Notes

Only the Client installer is required for Prepar3D v3.4 Hotfix 3

To update with the Client only, Please see here for Instructions Update the Client

tonaz
Posts: 53
Joined: Fri Jan 16, 2015 12:28 am

Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868

Postby tonaz » Thu Feb 02, 2017 12:25 pm

Hi,
release notes for the 3.4.22 SDK?
thanks

xmosquitox
Posts: 9
Joined: Thu Feb 02, 2017 12:08 pm

Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868

Postby xmosquitox » Thu Feb 02, 2017 1:29 pm

First, thank you for your support guys!

After updating the Hotfix 3, I still have some problems with the current NVIDIA driver 378.49.

http://www.prepar3d.com/forum/viewtopic ... 1&start=60

User avatar
nigelallenby
Posts: 123
Joined: Sat Jun 07, 2014 9:43 am

Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868

Postby nigelallenby » Fri Feb 03, 2017 2:31 pm

Well Done Poppet and LM! A relative stutter free flight sim at last.

Followed Elaine's guide to the "T", installed FSUIPC4961, latest Nvidia driver already 378.49 already installed and updated Plan-G to the latest version and now have a steady flight sim with a FPS average variation of 0.4% locked at 23.
I have this :-
[TextInfo.2]
FrameRate=1,1
LockedFrameRate=1,2
GForce=1,3
FuelPercentage=1,4
AverageFrameRate=2,1 to record on screen.

The only additions to P3D.cfg I've added are :- FIBER_FRAME_TIME_FRACTION=0.1
[JOBSCHEDULER]
AffinityMask=14

Are these needed?

Nigel
If it ain't broke, take it apart and fix it.
Intel i5-2500K @ 3.30GHz Sandy Bridge. ASRock Q77M vPRO Motherboard. 8GB DDR3 Ram. ASUS NVIDIA GeForce GTX 1060 3GB. 500GB SSD HD , secondary 500GB HDD, third 320 GB. OCZ 750 watt PSU.Win10 Home 64bit

User avatar
aeronauta
Posts: 1443
Joined: Sun Oct 23, 2011 1:56 am
Location: Melbourne, Australia

Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868

Postby aeronauta » Fri Feb 03, 2017 10:42 pm

Depending on your CPU affinityMask 14 may be causing more damage than good, and fftf=0.1 nothing..remove them and see..

Jorge
Jorge Roldan
OZx Developer (aero) - Hovercontrol Helicopter Certified Pilot - Spad.Next Beta Tester - VATPAC Pilot PR - Nemetz Designs Beta Tester

dandimm
Posts: 8
Joined: Mon May 19, 2014 4:44 pm

Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868

Postby dandimm » Sat Feb 04, 2017 12:01 pm

Hello - will someone please confirm that Hotfix 3 is cumulative and includes hot fix 1 and hot fix2. I have seen some posts suggesting that it does not. I could not find anything in the release notes stating either way..

I wanted to also say thank you to LM for correcting the SLI issues. Working great for me!

Thanks in advance.
Daniel

User avatar
nigelallenby
Posts: 123
Joined: Sat Jun 07, 2014 9:43 am

Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868

Postby nigelallenby » Sat Feb 04, 2017 3:59 pm

Hi Jorge,
Depending on your CPU affinityMask 14 may be causing more damage than good, and fftf=0.1 nothing..remove them and see..
Did that and straight away my FPS dropped by 3-5 with an average of 10-15%, i.e my FPS was locked at 23 but it was showing 19-20 during a flight. No stutters though so I re-introduced FFTF into the P3D.cfg and I have a steady 23FPS and smooth. Have not installed AffinityMask but have set Priority to "High" in Task Manager prior to flight.

Nigel

P.S. Do not have SLI installed.
If it ain't broke, take it apart and fix it.
Intel i5-2500K @ 3.30GHz Sandy Bridge. ASRock Q77M vPRO Motherboard. 8GB DDR3 Ram. ASUS NVIDIA GeForce GTX 1060 3GB. 500GB SSD HD , secondary 500GB HDD, third 320 GB. OCZ 750 watt PSU.Win10 Home 64bit

elmucki
Posts: 116
Joined: Mon May 20, 2013 9:17 pm

Re: Prepar3D v3.4 Hotfix 3 – SLI Update. v 3.4.22.19868

Postby elmucki » Mon Feb 06, 2017 12:21 pm

since hotfix one and two cant be downloaded anymore, i think it would be save to think that it is a cumulative update.


Return to “Rules & News”

Who is online

Users browsing this forum: No registered users and 2 guests