Search found 15 matches

by HLFS
Sat Sep 21, 2019 5:26 pm
Forum: Prepar3D Professional Plus Client Application Questions
Topic: Multichannel cfg documentation / ViewGroup crash
Replies: 0
Views: 2672

Multichannel cfg documentation / ViewGroup crash

Dear everybody, I am writing this as I again try to assist a customer in multichannel related issues. The setup is one master, one visual client with three GPUs, three projectors attached, warped with FlyElise. The client exhibits strange crash behaviour. The client synchronizes and loads, but in ab...
by HLFS
Wed Apr 10, 2019 9:21 pm
Forum: Hardware Specific Questions
Topic: Multichannel recommended GPU?
Replies: 0
Views: 1519

Multichannel recommended GPU?

Dear everyone, we are evaluating upgrading the hardware of one three-projector-simulator running P3d v4.4. It's a multichannel configuration, with one computer running the host and hardware of the sim, and one the visual. The visual client has two GTX970 running three projectors, the middle attached...
by HLFS
Sat Nov 03, 2018 7:49 pm
Forum: Prepar3D Client Application Questions
Topic: All non-addon runways vanished / 2.5
Replies: 0
Views: 2460

All non-addon runways vanished / 2.5

Hello all, I am checking a problem for a customer who is running an older Prepar3d installation (v2.5) with a lot of addons. Besides a lot of different singular addons (like Frankfurt Professional by Aerosoft), he has also the global Palette by OrbX installed, namely Global, Global Vector and the am...
by HLFS
Tue Mar 20, 2018 3:47 pm
Forum: Prepar3D Professional Plus Client Application Questions
Topic: Multichannel Network performance
Replies: 0
Views: 1782

Multichannel Network performance

Hey all, we are encountering some performance trouble with a multichannel demo setup. Setup: -1x Master, 1x visual pc with two gtx 970 -1gbit network -windows 10, p3d v4.1 -3x projector 1920x1080, configured with view groups; 1 GPU the center projector, 2 gpu outer projectors -globalterrainview = tr...
by HLFS
Thu Apr 06, 2017 4:03 pm
Forum: Prepar3D Professional Plus Client Application Questions
Topic: License transfer Prof. plus to prof?
Replies: 3
Views: 3026

Re: License transfer Prof. plus to prof?

Hey,
nice to know, thanks. Than only the question remains - is it sufficient to deactivate the developer license and activate with a "normal" license, or do we have to do uninstall/reinstall?
Best regards,
Niels
by HLFS
Thu Apr 06, 2017 3:05 pm
Forum: Prepar3D Professional Plus Client Application Questions
Topic: [RESOLVED] Prosim737 addon aircraft not working with Multichannel
Replies: 10
Views: 5277

Re: Prosim737 addon aircraft not working with Multichannel

Hello,
you can just copy the A/C folder in the simobjects over onto the MC-clients. That should be sufficient.
-Niels
by HLFS
Thu Apr 06, 2017 12:43 pm
Forum: Prepar3D Client Application Questions
Topic: Microstutters in Multichannel?
Replies: 2
Views: 1328

Re: Microstutters in Multichannel?

Addendum to the System:
Prepar3d Prof Plus 3.4hf3 on all computers, Windows 10 in the Background, current nVidia-driver. Should have added that in the first post.
by HLFS
Thu Apr 06, 2017 10:06 am
Forum: Prepar3D Professional Plus Client Application Questions
Topic: License transfer Prof. plus to prof?
Replies: 3
Views: 3026

License transfer Prof. plus to prof?

Hey team, we are evaluating a Multichannel system for our flightsimulator for some month now. The whole system is now stable enough to be transfered to a productive system. For evaluation and to see if we are working in the right direction, we tested with a professional plus license; however, now we...
by HLFS
Thu Apr 06, 2017 10:02 am
Forum: Prepar3D Client Application Questions
Topic: Microstutters in Multichannel?
Replies: 2
Views: 1328

Microstutters in Multichannel?

Hey team, we are evaluating a Multichannel system for our flightsimulator for some month now (regarding the license there will also be a question in a seperate thread). The whole system is now stable enough to be transfered to a productive system, however we are still encounter one problem: Microstu...
by HLFS
Fri May 08, 2015 7:00 am
Forum: Prepar3D Client Application Questions
Topic: 2.5 - 180°-visual
Replies: 20
Views: 6709

Jim, what then is the intended way for 180° (or even a bit less)? -MultiView is only possible with several screens -Increasing FOV gives Mercator distortion -multiple undocked cameras dont match with modified Pbh (I assume this works the same when we would use multiple visual workstations?) How shou...
by HLFS
Sun Apr 26, 2015 9:50 am
Forum: Prepar3D Client Application Questions
Topic: 2.5 - 180°-visual
Replies: 20
Views: 6709

Hey, the main problem is less the warping and blending, but more calculating the correct frustrums/camera views etc... We haven't found a useful solution for this until now, and Immersive calibrator only gives data for a perfect cylinder... I tried the camera calibration now, fascinating, but kinda ...
by HLFS
Thu Apr 23, 2015 10:42 am
Forum: Prepar3D Client Application Questions
Topic: 2.5 - 180°-visual
Replies: 20
Views: 6709

Hey, FlyElise did not do any setup, we are currently using warpalizer v2, but this is not possible for Prepar3d v2 due to Dx11 usage, and a Warpalizer Upgrade would be way to costly, so we are experimenting with FlyElise. Jan, I put my hands on a FE-designer pro license and currently am experimentin...
by HLFS
Tue Apr 21, 2015 10:04 am
Forum: Prepar3D Client Application Questions
Topic: 2.5 - 180°-visual
Replies: 20
Views: 6709

Hey all, the pitch modification is necessary as simulator and projection system is static and not aligned in a way that the "default" horizon height is the correct view angle out of the flightdecks.. Btw I decided I will test for now on another simulator which uses only two projectors for avaibility...
by HLFS
Sun Apr 19, 2015 4:11 am
Forum: Prepar3D Client Application Questions
Topic: 2.5 - 180°-visual
Replies: 20
Views: 6709

Hello everyone, first thank you for the answers. To answer JanL's questions: -warping-testing with the commercial version of FlyElise -the visual was done manually by an external company until now with Prepar3d v1, but the upgrade to v2 is now my task. -It is a fully vanilla 2.5-installation on a Wi...
by HLFS
Fri Apr 17, 2015 11:10 am
Forum: Prepar3D Client Application Questions
Topic: 2.5 - 180°-visual
Replies: 20
Views: 6709

Hey everyone, I'm trying to get Prepar3d 2.5 running with a 3-projector-System spanning a cylindrical 180°. I tried several solutions, most promising seemed to be creating 2 multiple views with the custom camera engine, with a overriden HFOV of 90° and a VFOV of 60° and an ofset heading of 45° left/...

Go to advanced search